Applications
One gateway platform, many jobs
The same gateway that pushes pollution data to CPCB also reads energy meters, runs pump houses, watches DG sets, cold rooms and machines, and sends each weighment to the ERP. Three capabilities underneath, every job on top.
Three capabilities, every application
The store & forward mechanics are explained hands-on in the interactive guide.
Applications
each with a step-by-step animation of the gateway at workCPCB / OCEMS Compliance
Emission and effluent data pushed to CPCB and your state board in parallel, with LAN-to-4G failover and delayed-data backfill built in.
Open the application page →Energy & power monitoring
Up to 64 Modbus meters on one line — kWh, kW, PF — per-meter packets, two servers, SMS on set points.
Open the application page →Tank, pump & flow monitoring
Level on 4–20 mA, flow by Modbus or pulse — SMS at your set points and the pump switched by the relay.
Open the application page →DG set monitoring
Controller readings, fuel level and run hours on one clock — start, stop and low-fuel texts from the gateway.
Open the application page →PLC & machine connectivity
PLCs and drives to your MES or cloud — named tags, fault-bit SMS, a local HMI and remote SCADA on one gateway.
Open the application page →Cold room & temperature monitoring
Temperature, humidity and door state on one clock — a text when a room crosses its limit, records with no gaps.
Open the application page →Weighbridge automation
The settled weight captured once per truck and sent to your ERP — no manual entry, nothing lost offline.
Open the application page →Your site is not on the list?
Tell us the equipment, the signals and where the data has to go. Most sites are a mix of what is above — we will map yours to a gateway and configure it before it ships.
Describe your site →See it working
live in your browserTry the controls and watch the gateway respond — nothing to install, no sign-up. These same techniques sit under every application above.
Pulse & run-hour metering
Two inputs count pulses, two more clock run hours — at once, on one gateway. Set a counter to match the plate on the machine, or zero it after a service, without a site visit.
Open the walkthrough →Remote IO over 4G
An input closes here, a relay follows there. Any open MQTT broker, master and slave talking direct — no server, no bridging software.
Open the walkthrough →Beyond these, we build dedicated solutions for OEMs and project clients — hardware and firmware shaped around your requirement rather than ours: a different I/O mix, a protocol we do not ship as standard, your own branding on the box. Each one stays private to the client it was built for; talk to us about yours.
Where this is heading
segments we are watchingIndia’s infrastructure build-out keeps creating new places where field equipment must reach a server reliably. The platform underneath is ready for them.